Cork Product Frequently Asked Questions (FAQ's)

Synthetic: Synthetic corks are made from a food grade plastic polymer. They tend to be less resilient than a natural cork so generally require a more uniform bottle opening. This modern addition to traditional cork is available in a variety of colors.

Jelinek Eco-Hybrid is a combination of synthetic material and real cork. It incorporates the sustainable elements of natural cork, is slightly more flexible and resilient than a fully plastic synthetic stopper, yet maintains other properties of a synthetic.

Suspendisse feugiat. Fusce commodo aliquam arcu. Phasellus leo dolor, tempus non, auctor et, hendrerit quis, nisi.

Suspendisse feugiat. Fusce commodo aliquam arcu. Phasellus leo dolor, tempus non, auctor et, hendrerit quis, nisi.

We can print on most any cork substrate, however there are some things to keep in mind.

The common size limitation for simple flat surface objects (examples: cork sheets, fabric, yoga blocks, coasters, the long surface of a wine cork) are as follows:

4-color print: 29.5" x 12.5"

Black only: 26" x 17"

For objects outside of those size guidelines, we may need to setup special tooling or even outsource printing to a print partner. In some cases there can be extensive setup and tooling costs. In almost all cases for non-standard sized object there will be a minimum order requirement (for example, the tooling costs do not allow us to print on a single 48" cork roll however we could print on multiple rolls as the tooling cost becomes feasible). Please contact us in these cases so that we can review your project.

Suspendisse feugiat. Fusce commodo aliquam arcu. Phasellus leo dolor, tempus non, auctor et, hendrerit quis, nisi.

Suspendisse feugiat. Fusce commodo aliquam arcu. Phasellus leo dolor, tempus non, auctor et, hendrerit quis, nisi.

Yes you can with our approved water based contact cement. You need to make sure that the block wall is in good shape with no spalling, pitting, flaking. You should apply 2 coats of contact cement to the concrete since it is porous (allowing the first coat to dry before applying the second coat).

The State of California requires you to provide a certificate with the following information:
- The name and address of the purchaser.
- The purchaser’s seller’s permit number
- A description of the property to be purchase.
- An explicit statement that the described property is being purchased for resale.
- The date of the document.
- The signature of the purchaser or someone approved to act on his or her behalf.

Blank certificates are available from this site

Jelinek Cork will verify your reseller number at https://onlineservices.cdtfa.ca.gov/_/
[in the bottom menu select Verify a Permit -- select Seller's Permit for the search and enter the number. You may need to use leading zeros]